Fixitshop is an on line catalog of parts for most of your restaurant needs with over 7,000 items on line for emmidiate delivery |
EPOXY PUTTY (4 OZ TUBE) |
EPOXY PUTTY (4 OZ TUBE) Check Latest Price
WHITE EPOXY PUTTYMixes like putty, hardens like steel. It can be sawed drilled and tapped. Works on most metals, wood, masonry, ceramics, glass, plastic, or porcelain. One piece epoxy sets in five minutes and will even set under water. The one piece formula leaves no left avers and no mess ...
|
DRAIN BLASTER (W/ADAPTER) |
DRAIN BLASTER (W/ADAPTER) Check Latest Price
DRAIN BLASTER'No.TOL-01366 A new alternative to plungers and harsh chemicals. Attaches to most faucets and turns standard water pressure into a high velocity jet stream of wafer that can cut through drain clogs. Drain Blaster's powerful rotary side jets also clean pipe walls. ...
|
EPOXY PUTTY (4 OZ TUBE) |
EPOXY PUTTY (4 OZ TUBE) Check Latest Price
WHITE EPOXY PUTTYMixes like putty, hardens like steel. It can be sawed,drilled and tapped. Works on most metals, wood, masonry, ceramics, glass, plastic or porcelain. One piece epoxy sets in five minutes and will even set under water. The one piece formula leaves no left over and ...
|
DRAIN UNCLOGGER (THE BULLY) |
DRAIN UNCLOGGER (THE BULLY) Check Latest Price
THE "BULLY" DRAIN UNCLOGGERTurn standard water pressure into a high velocity jet stream of water Powerful rotary side jets clear debris from large drains indoors and outdoors Attaches to standard garden hose Environmentally saf ...
|
PLUNGER (W/ SNAKE) |
PLUNGER (W/ SNAKE) Check Latest Price
...
|
NOZZLE, SPRAY (STRAHMAN, HD) |
NOZZLE, SPRAY (STRAHMAN, HD) Check Latest Price
Strahman Wash Down Spray Nozzle Adjusts from a soft spray to a strong, straight sprayas lever is pulled forward Automatically shuts off when handle is released Maximum water temperature 200°F (93.3°C) Inlet coupling for 3/4 (1.9cm) ID hose or 1/2(1.2cm) ...
|
FITTING (SWIVEL,1/2NPT MXGHT) |
FITTING (SWIVEL,1/2NPT MXGHT) Check Latest Price
Swivel Fitting for No. 159-1000 1/2 (1.2cm) NPT male x 3/4(1.9cm) female garden hose thread swivel fitting ...
|
HOSE,HOT WATER(5/8ID,RED,50') |
HOSE,HOT WATER(5/8ID,RED,50') Check Latest Price
Red Heavy Duty Rubber Industrial Hot Water Hose 5/8 ID x 50' (1.5cm ID x 15.2m) roll Crush proof brass garden hose fittings Withstands temperatures to 200°F (93.3° C) 500 lb. (226.7kg) burst strength Double spiral reinforcement for cut resistance T ...
|
CARTRIDGE,STRAHMAN SPRAY VALVE |
CARTRIDGE,STRAHMAN SPRAY VALVE Check Latest Price
Strahman Wash Down Spray Nozzle Replacement Cartridge Contains all internal moving parts ...
|
HOSE,HOT WATER(3/4ID,RED50') |
HOSE,HOT WATER(3/4ID,RED50') Check Latest Price
Red Heavy Duty Rubber Industrial Hot Water Hose 3/4 ID x 50' (1.9cm ID x 15.2m) roll Crush proof brass garden hose fittings Withstands temperatures to 200°F 500 lb (226.7kg) burst strength Double spiral reinforcement for cut resistance Teknor Apex ...
|
COVER, STRAHMAN SPRAY NOZZLE |
COVER, STRAHMAN SPRAY NOZZLE Check Latest Price
Strahman Wash Down Spray Nozzle Replacement Rubber Cover ...
|
NOZZLE, SPRAY (INSULATED, HD) |
NOZZLE, SPRAY (INSULATED, HD) Check Latest Price
Strahman Wash Down Spray Nozzle Replacement Rubber Cover ...
|
RACK, HOSE (STRAHMAN) |
RACK, HOSE (STRAHMAN) Check Latest Price
Strahman Hose Rack Stainless steel Holds up to 50 ft (15.2m) of hose ...
|
CARRIER, HOSE(3W,BLACK NYLON) |
CARRIER, HOSE(3W,BLACK NYLON) Check Latest Price
HOSE CARRIERFits easily around a 100 foot garden hose The easy to use velcro closures adjust to fit most hose sizes.Can also be used for extension cords, tubing, etc. Tested up to 50 pounds 3" wide Strong, reinforced black nylon with double stitched nylon binding a ...
|
PLUNGER (KORKY) |
PLUNGER (KORKY) Check Latest Price
7 (17.7cm) Deep Bus Box 15 L x 20 W (38.1cm L x 50.8cm W) Dishwasher safe NSF certified Gray high density polyethylene ...
|
"HOSE, CREAMERY WASHDOWN (25FT)" |
"HOSE, CREAMERY WASHDOWN (25FT)" Check Latest Price
Creamery Wash Down Hose 25 (7.6m) L For heavy-duty use 1/2 (1.2cm) NPT male x 3/4 (1.9cm) femalegarden hose thread 3/4 (1.9cm) ID hose Maximum pressure 200 PSI Withstands hot water and saturated steam up to 298°F (147.7°C) ...
|
"HOSE, CREAMERY WASHDOWN (50FT)" |
"HOSE, CREAMERY WASHDOWN (50FT)" Check Latest Price
CREAMERY WASH DOWN NOSE 50' long For heavy-duty use 1/2" NPT male x 3/4" female garden hose thread 3/4" I.D. hose Maximum pressure 200 PSI Withstands hot water and saturated steam up to 298° ...
|
"PACKING, TEFLON (3/32 X 2')" |
"PACKING, TEFLON (3/32 X 2')" Check Latest Price
TEFLON PACKING 3/32" round x 2' long roll 14° to 160° ...
|
"COMPOUND, PIPE JOINT (W/BRUSH)" |
"COMPOUND, PIPE JOINT (W/BRUSH)" Check Latest Price
PIPE JOINT COMPOUND For use with water, steam and gas Non-corrosive, 1 lb. can (8 fl. oz.) Brush in ca ...
|
NOZZLE, SPRAY (STANDARD) |
NOZZLE, SPRAY (STANDARD) Check Latest Price
Standard Spray Nozzle Maximum water temperature 100°F (37.7°C) Chip resistant powder coat finish Die cast metal body ...
|
"HOSE, STEAM (1/2ID, 10FT)" |
"HOSE, STEAM (1/2ID, 10FT)" Check Latest Price
Neoprene Steam Hose with Internal Wire Braid 1/2 (1.2cm) ID 10ft (3m) L Maximum pressure 250 PSI For temperatures up to 450°F ...
|
"HOSE, STEAM (3/4ID, 10FT)" |
"HOSE, STEAM (3/4ID, 10FT)" Check Latest Price
Neoprene Steam Hose with Internal Wire Braid 3/4 (1.9cm) ID 10ft (3m) L Maximum pressure 250 PSI For temperatures up to 450°F ...
|
"NOZZLE,SPRAY (HYDRO-PRO)" |
"NOZZLE,SPRAY (HYDRO-PRO)" Check Latest Price
Spray Nozzle by Strahman For use with FMP #117-1000 and 117-1001 creamery wash down hoses Can be used with standard water hose (must use FMP #159-1025 adaptor) Ergonomic design reduces user fatigue Patented trigger locking mechanism 5-7/8" L x 7" H Maximum ...
|
SWIVEL-PRO ADPT (1/2X3/4GHT) |
SWIVEL-PRO ADPT (1/2X3/4GHT) Check Latest Price
Swivel-Pro Adaptor For use with PLB-11024 Spray Nozzle by Strahman ½" NPT inlet ¾" garden hose thread outlet ...
|
"NOZZLE, SPRAY(THERMO-PRO 2000)" |
"NOZZLE, SPRAY(THERMO-PRO 2000)" Check Latest Price
Strahman Thermo-Pro 2000 Spray Nozzle Features easy-to-use lever arm and molded rubber hand guard for complete control and flexibility. Display inset in nozzle indicates water temperatures from 140° ½" NPT Maximum working pressure to 150 PSI Repla ...
|
| | | | | | | | | | | | | | | | | | | | | | | | |
| Copyright FIXITSHOP.COM 2002\r\nFOR PARTS HELP CALL 888-40 FIX IT
|
|